Empyrean

  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
Empyrean

Tap for gallery

$0.00


Product Information
Specification

This product is in pre-production and is currently available for order on Indiegogo. Sales will be available on this store after the Indiegogo campaign is finished.

A powerful yet affordable breadboard-friendly Arduino IDE compatible 32-bit microcontroller with ample code space and RAM. Empyrean is derived from the Arduino Zero to be a much more builder-friendly microcontroller which excludes the expensive and rarely-used debug hardware. The PCB has castellated edge pins and a freely-available KiCad footprint for easy integration into larger projects. Empyrean is self-contained when used with a USB connection, as all programming, communication with a host PC (via a virtual UART), and power is provided. Three user-addressable status LEDs are provided on-board, as well as one power LED indicator (which can be disabled with a jumper to save current if desired). Devoted I2C and SPI serial communcation pins are available, as well as a shared hardware UART on digital pins 0 and 1. Six high-resolution (12-bit) ADC pins are included for analog sensing, as well as one 10-bit DAC pin for accurate waveform generation. Nearly every IO pin can be used for GPIO communications in addition to specialty functions that Empyrean provides.

Coding for Empyrean is done with the Arduino IDE (we hope to provide other platforms soon). Installing the board support package for Empyrean is quick and simple to do, just see the documentation section below for details. Arduino sketches can be uploaded via the Arduino IDE, as you would typically do with other Arduino-compatible boards. Empyrean also mounts to the PC filesystem as a storage device so that you may load a sketch onto it via a simple drag-and-drop of a specially compiled UF2 file. The Empyrean bootloader itself can also be updated in this way so that you don't have to have a ATMEL-ICE or similar programmer to do this job.

Specifications

  • All SMT components assembled, 0.1" headers included unsoldered
  • Fully tested
  • Four built-in status LEDs: 3 user-addressable and 1 power
  • IC: Microchip Technologies ATSAMD21G18A (Alpha)/Microchip Technologies ATSAMD21G16B (Beta)
  • Clock Speed: 48 MHz
  • Flash Program Storage: 256 kB (Alpha)/64 kB (Beta)
  • RAM: 32 kB (Alpha)/8 kB (Beta)
  • ADC: 12-bit, 6 available input pins
  • DAC: 10-bit, 1 available output pin
  • Input Voltage: 5 VDC regulated (from USB or on VUSB pin), 3.3 VDC regulated (on 3.3V pin), 5-16 VDC (on VIN pin)
  • Pin Voltage: 3.3 VDC maximum
  • Pin Current: 7 mA sink/source maximum
  • Board Current: 150 mA total board current
  • PCB material: high quality 1.2 mm double-sided FR4 with soldermask and ENIG coating
  • PCB dimensions: 18 mm x 45 mm
  • RoHS Compliant

Documentation

Quick Reference Guide

Schematics

Instructions for installing Empyrean board support on the Arduino IDE are currently available on the Empyrean GitHub repository. Full-fledged documentation will be available upon launch.

Product CodeEMP-ALPHA
ManufacturerEtherkit
ConditionNew
Weight0.1lb
Width1.8cm
Height0.12cm
Depth4.5cm

This field is required.
Top

eCommerce by CubeCart